AIRAYA Wireless Networks - Online Store
Home » Multipoint Bridges for 4.9 GHz Public Safety Applications
 Add to cart Checkout
WG-300S-MSU (Mobile subscriber unit-For both Public Safety/ISM Bands)
ISBN WG-300S-MSU
WG-300S-MSU (Mobile subscriber unit-For both Public Safety/ISM Bands)
Ask a question | Get specifications | Installation guide | Performance data | Frequency plan | Ordering guide

NEW!!! The WG-300S-MSU mobile subscriber unit (mobile client) is designed for public safety use where wireless multipoint communication is needed between base stations / mobile command centers and vehicles or between vehicles. This unit features a ruggedized enclosure, integrated vehicle mounting hardware kit, 8-30 VDC vehicle power connections, and a waterproof bulkhead Ethernet connection.

The WG-300S-MSU provides up to 42 Mbps of TCP/IP throughput for mobile and hotspot communication in the 4.94-4.99, 5.25-5.35, and 5.725-5.85 GHz frequency bands.

The WG-300S-MSU includes:

  • 1 Unit Wg-300S-N (w/N-type female connector)
  • WirelessGRID MobileRoam firmware
  • 8-30VDC vehicle power cable (15ft)
  • Integrated vehicle mounting points and hardware kit
  • Waterproof Bulkhead Ethernet Connector

Radio Specifications
Worldwide Frequency Bands Supported (Local regulations apply) 4.940-4.990 GHz Public Safety Band (FCC Part 90, licensed Intl.) Non-overlapping Channels: 8 x 5 MHz, 4 x 10 MHz, 2 x 20 MHz

5.25-5.35 GHz license-exempt (FCC, Industry Canada, Mexico) Non-overlapping Channels: 19 x 5 MHz, 9 x 10 MHz, 4 x 20 MHz, 2 x 40 MHz

5.725-5.850 GHz licence exempt UNII & ISM Bands (ETSI, FCC, MII) Non-overlapping Channels: ISM, UNII: 25 x 5 MHz, 12 x 10 MHz, 5 x 20 MHz, 2 x 40 MHz
Radio Type Orthogonal Frequency Division Multiplexing (OFDM)
Standards Compliance 802.3, 802.11i, 802.11a hardware with proprietary bridging extensions
Total System EIRP and radio output power Radio output power: Max: 20dBm (Set to local regulatory requirements to comply with transmit, conducted and EIRP power limits)
Data Rate 54 to 1 Mbps
Receiver Sensitivity -73 to -91 dBm
Modulation 64QAM, 16QAM, QPSK, BPSK
WirelessGRID Operating Modes Mobile Point to Multipoint, and Hotspot
Power Supply Vehicle power sub-system (12V Input. 2 Amp Fuse, 5 Volt, 2 Amp output.
Configuration and management Configuration utility: Built-in webserver, telnet
Software upgrades: FTP download
Antenna alignment tools: Built-in RSSI (signal strength), link optimization/throughput
LED status indicators: For power, network link/activity, radio link/activity monitoring
Real-time Link Monitoring: Secure Management Interface - Real-time signal strength, authentication data, system uptime, data rate, channel selection, and more.
Security SecureRF architecture - Proprietary channelization and bridge protocol, link authentication, AES-128/WEP 152-bit data encryption options, VPN support for Ethernet tagged frames (802.1q, 802.1p)
FCC Emission Designators 5M00X1D, 10M0X1D, 15M0X1D, 20M0X1D (Only 5, 10, and 20 MHz-wide channels available in 4.9GHz)
Antenna Type Antenna ordered seperately
Storage Temperature -30°to +145°
Storage Humidity 0 to 100% RH (non-condensing)
Operating Temperature -20° to 130°F ambient
Thermal Shock 1°F per minute drop in temperature over 15°F range between 110°F and 60°F
Relative Humidity 20% to 90% RH including condensation
Vibration 0.3g(rms), 5 to 200 Hz
Shock 6g peak (instantaneous)
Dust Protected from airborne particles and dust encountered in an industrial environment
Inclination 0° to 180° off vertical
List Price: $699.00
Price: $699.00
Quantity:
Add to cart
« Previous | Next »
 
Product Reviews
No Reviews For This Product.
Click to review this product
Our Store
Order Information
Additional Information

© 2019 AIRAYA Corp. All Rights Reserved.